Device Security > User Management
Device Security
84
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
SNMP Auth Type Specifies the authentication protocol that the device applies for user
access via SNMPv3.
Possible values:
hmacmd5
(default value)
For this user account, the device uses protocol HMACMD5.
hmacsha
For this user account, the device uses protocol HMACSHA..
SNMP Encryption
Type
Specifies the encryption protocol that the device applies for user access
via SNMPv3.
Possible values:
none
No encryption
des
(default value)
DES encryption
aesCfb128
AES128 encryption
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
– In the "User Name" field, you specify the name of the user account.
Possible values:
Alphanumeric ASCII character string with 1..32 characters
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...