6. Ensure that the shutdown was completed and the Power LED blinks in
green.
Figure 4-50 Power off procedure of failed server blade
(A)-2 For SMP CB 520X B1/B2/B3
1. Ensure that Power LED lights in green.
2. Logon to the web console and select Resource.
3. Select Modules > All Modules > Server blades >Server Blade n of
the SMP configuration.
(Note: "n" indicates the slot number of the primary blade.)
4. Select Condition tab.
5. Click Power OFF.
6. Ensure that the shutdown was completed and the Power LED blinks in
green.
Common process for replacement
4-59
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
