Hitachi CB 520H B3 - Page 307

14. Select < another number >, and then press Enter key.
< another number > : 2 or 4
15. Repeat from step 2 to step 13 for second port of the failed mezzanine
card.
16. Power off the server blade.
Confirming parameters of FC mezzanine card on CB 520X B1/B2/B3, CB 520H
B3/B4
1. Select System settings in System Configuration and Boot
Management window, and then press Enter.
Configuring Emulex mezzanine card
7-13
Hitachi Compute Blade 500 Series System Service Manual