2. Select Storage in System settings window, and then press Enter.
3. Confirm the slot number and the port number of failed mezzanine card. In
addition, record the value of WWN.
Select Emulex nnn line for the failed mezzanine card slot #, where nnn is
odd number, in Storage window by using ↓ and ↑ keys, and then press
Enter.
Note: A half wide server blade can install a mezzanine card in slot 2.
A full wide server blade can install two mezzanine cards in slot 2 and slot
4.
7-14
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
