4. Write down the alphanumeric in Node Name line and the settings in Set
Boot from SAN.
Select Scan for Fibre Devices by using ↓ and ↑ keys, and then press
Enter.
5. Select 0001: HITACHI DF600F 0000 line by using ↓ and ↑ keys, and
then press Enter.
Write down the alphanumeric in the upper right WWN line. Press Esc
once.
(Note: The indication of HITACHI DF600F 0000 portion varies
depending on the connected peripheral device.)
Configuring Emulex mezzanine card
7-15
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
