19. Repeat from step 2 to step 17 for second port of the failed mezzanine
card.
20. Power off the server blade.
Restoring parameter of FC mezzanine card on CB 520X B1/B2/B3, CB 520H
B3/B4
1. Select System settings in System Configuration and Boot
Management window by using ↓ and ↑ keys, and then press Enter.
2. Select Storage in System settings window, and then press Enter.
7-32
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
