3. Click â–¶ of â–¶ Server Blades > Target server blade.
4. Click Condition in lower right pane, confirm Server blade firmware
version column, and then write down the version.
5. Skip the following step 6 and step 7 when the version of management
module is A0135 or earlier.
6. Click Action > CNA revision history in upper right of the window.
7. Confirm and write down the latest CNA firmware version of the failed CNA
mezzanine card in CNA revision history window.
Consider that the latest Update Date and Time represents the latest
CNA firmware version of the CNA product.
Configuring Emulex mezzanine card
7-55
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
