Note: When the following message is indicated, press Enter.
16. The iSCSI Select Utility is displayed. Confirm and record the iSCSI
Initiator Name.
17. Select Controller Configuration, and then press Enter key.
Note: The iSCSI Initiator Name may not be fully indicated in the dialog
box.
Move cursor to right by using → key to confirm the last character.
18. Controller Selection menu window is displayed. Select the port#0, and
then press Enter key.
Configuring Emulex mezzanine card
7-61
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
