9. Copy a proper firmware folder to the following directory in console PC.
Directory: c:\ inetpub \ ftproot \
10. Enter firmwaredownload -s, and then press Enter key.
11. Enter < IP Address > of console PC, and then press Enter key.
IP Address : IP address of console PC
12. Enter upload, and then press Enter key.
13. Enter < the copying firmware folder name >, and then press Enter
key.
14. Enter 2, and then press Enter key.
15. Enter password, and then press Enter key.
16. Enter y, and then press Enter key when prompted "Do Auto-Commit after
Reboot [Y]".
Enter n, and then press Enter key when prompted "Reboot system after
download [N]".
Enter y, and then press Enter key when prompted "Do you want to
continue (Y/N) [Y]".
9-10
Updating firmware
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
