6 Select “Yes” by pressing “ ” or “ ” and press “OK”. The set-
ting is conrmed and the screen returns to the normal mode.
OK
Set individual louver?
Louver Setting:01-03
Yes No
SEL. ENT
TN.
7 Ensure that “INDV” is turned on at the air ow section on the
normal mode.
A/C
INDV
MODE SPEED LOUV. TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
Cancellation of louver setting
1 Select “Louver Setting” from the menu and press “OK”.
Menu
Motion Sensor Setting
Total Heat Exchanger SET
VENTI
Louver Open/Close
02
/
03
Louver Setting
15:10(Fri)
ENT
TN.SEL.
OK
2 Select “Cancel INDV Louver SET” from the individual louver
set and press “OK”.
NOTE
If the number of indoor units connected with the remote control is 1, the
screen passes directly to display the step 4 after this step.
OK
Cancel INDV Louver SET
Louver Setting
Louver Setting
ENT
TN.SEL.
3 Select the indoor unit to cancel by pressing “ ”, “ ”, “ ” or
“
”. Press “OK”. The conrmation screen will be displayed.
NOTE
The indoor unit displayed on the screen ashes if the individual louver is
set.
OK
Cancel INDV Louver SET
01-01
01-02
01-03
Select unit to cancel.
01-04
ENT
TN.SEL.
4 Select “Yes” by pressing “ ” or “ ” and press “OK”. The indi-
vidual louver setting is cancelled and the screen returns to the
normal mode.
NOTE
All the individual louver setting is cancelled.
OK
Cancel individual louver?
Cancel INDV Louver SET:01-03
Yes No
SEL. ENT
TN.
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
99
4