Hitachi PSC-A1T - Page 269


Schedule settings
This function is used for timer operation.
It is possible to set a schedule for a block and for each group.
A holiday setting independent of the schedule is also available.
Schedule timer settings
Timer setting for weekly schedule
1 Select “Schedule Setting” from the screen of “Menu”.
2 Select “Schedule Timer Setting” from the screen of “Schedule Setting”.
Back
Menu
25/01/2010 (Mon) 10:20
Filter Sign Reset Schedule Setting
Adjusting
Date/Time
Touchscreen
Cleaning
Touchscreen
Calibration
Group Name
Register
Screen Display
Setting
Accumulated
Operation
Time
Contact
Information
Service Menu
(1)
Back
Schedule Setting
25/01/2010 (Mon) 10:20
Schedule Timer
Setting
Holiday Setting
Schedule Timer
ON/OFF Setting
(2)
3 Select the target (all groups, block or group).
• The blue button is indicated for the group with setup schedule.
• The white button is indicated for the group without setup schedule.
4 Select the target day of the week. (from Mon. to Sun.).
5 Select the schedule item number (from 1 to 10).
Schedule Timer Setting
Done
25/01/2010 (Mon) 10:20
F-Level
1-B
F-Level
1-A
F-Level
2
Annex
All Groups
Schedule
Copy
Delete
Setting
Group1A-03
Group1A-05
Group1A-07
Group1A-09
Group1A-11
Group1A-13
Group1A-15
Group1A-02
Group1A-04
Group1A-06
Group1A-08
Group1A-10
Group1A-12
Group1A-14
Buffet 1
North Area
Buffet 1
South Area
Buffet 1
East Area
Buffet 1
West Area
Buffet 2
North Area
Buffet 2
South Area
Buffet 2
East Area
Buffet 2
West Area
Meeting
Room A
Meeting
Room B
Meeting
Room C
Meeting
Room E
Meeting
Room D
Kiosk
Group1A-16
Group1B-03
Group1B-05
Group1B-07
Group1B-09
Group1B-11
Group1B-13
Group1B-02Group1B-01
Group1B-04
Group1B-06
Group1B-08
Group1B-10
Group1B-12
Group2-01
Group2-03
Group2-05
Group2-07
Group2-09
Group2-11
Group2-02
Group2-04
Group2-06
Group2-08
Group2-10
Group1A-01
(3) All Groups
(3) Block
(3) Group
54321
09876
Schedule Timer
Setting
DoneBack
Register
Cancel
Copy Day
of Week
Delete
Setting
SCHEDULE TIME
RUN/STOP SET TEMP.
STOP
Mon Tue Wed Thu Fri Sat Sun
12345
678910
- - : - -
- -
o
C
- -
RUN
- - : - -
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
- - : - -
- -
o
C
25/01/2010 (Mon) 10:20
RUN
F-Level 1-B
Group1B-03
(4)
(5)
6 Set the schedule time, run/stop operation and temperature.
Select the schedule item No. (1~10) and set the time.
Select “RUN” or “STOP”.
Set the temperature by tapping “
” or “ ”.
“- -” will be indicated when the time and temperature are not set.
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
253
5