Honeywell UMC800 - DO Function Block; Table 5-27 DO Dynamic Parameters

Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 61
5.21 DO Function Block
Description
The DO label stands for Digital Output. This block is part of the Logic or Fast Logic category. It looks
like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-27 DO Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT_D 1 REAL C R Physical output value
IN_D 2 BOOL I R
Static Configuration Parameters:
None