Honeywell UMC800 - 4 SUB Function Block; Table 5-83 4 SUB Dynamic Parameters

Function Parameter Index Reference
116 RS232 Communications Reference Manual 8/99
5.63 4SUB Function Block
Description
The 4SUB label stands for the Subtraction mathematical operation (4 Inputs). This block is part of the
Math category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Table 5-83 4SUB Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R output
A 2 REAL I R input 1
B 3 REAL I R input 2
C 4 REAL I R input 3
D 5 REAL I R input 4
Static Configuration Parameters:
None