Honeywell UMC800 - 8 AND Function Block; Table 5-11 8 AND Dynamic Parameters

Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 45
5.9 8AND Function Block
Description
The 8AND label stands for the AND Boolean function (8 Inputs). This block is part of the Logic or Fast
Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-11 8AND Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
DIG_1(X1) 2 BOOL I R input
DIG_2(X2) 3 BOOL I R input
DIG_3(X3) 4 BOOL I R input
DIG_4(X4) 5 BOOL I R input
DIG_5(X5) 6 BOOL I R input
DIG_6(X6) 7 BOOL I R input
DIG_7(X7) 8 BOOL I R input
DIG_8(X8) 9 BOOL I R input
Static Configuration Parameters: None