Function Parameter Index Reference
40 RS232 Communications Reference Manual 8/99
5.4 4ADD Function Block
Description
The 4ADD label stands for Addition Mathematical Operation (4 Inputs). This block is part of the Math
category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Table 5-4 4ADD Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R output
A 2 REAL I R input 1
B 3 REAL I R input 2
C 4 REAL I R input 3
D 5 REAL I R input 4
Static Configuration Parameters: None
To Next Page
Loading...
