Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 125
5.70 TRIG Function Block
Description
The TRIG label stands for Trigger or “One Shot” operation. This block is part of the Logic or Fast
Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-92 TRIG Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
X 2 BOOL I R input
Static Configuration Parameters:
None
To Next Page
Loading...
