Function Parameter Index Reference
82 RS232 Communications Reference Manual 8/99
5.40 NOT Function Block
Description
The NOT label stands for the NOT Boolean logic function or Logic Inverter. This block is part of the
Logic or Fast Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-49 NOT Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
X 2 BOOL I R input
Static Configuration Parameters:
None
To Next Page
Loading...
