Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 115
5.62 SUB Function Block
Description
The SUB label stands for the Subtraction mathematical operation (2 Inputs). This block is part of the
Math category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Table 5-82 SUB Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R output
X 2 REAL I R input 1
Y 3 REAL I R input 2
Static Configuration Parameters:
None
To Next Page
Loading...
Need help?
General
