Honeywell UMC800 - Table 5-97 WTUN Dynamic Parameters; WTUN Function Block

Function Parameter Index Reference
128 RS232 Communications Reference Manual 8/99
5.73 WTUN Function Block
Description
The WTUN label stands for Write Tuning Constants. This block is part of the Loops category. It looks
like this graphically on the Control Builder.
Dynamic Values
Table 5-97 WTUN Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status
GAIN 1 REAL I R proportional gain, 0.1 to 1000
RSET 2 REAL I R integration time, 0.02 to 50 (minutes)
RATE 3 REAL I R derivative time, 0.1 to 10 (minutes)
EN 4 BOOL I R enable
Static Configuration Values
None