Function Parameter Index Reference
84 RS232 Communications Reference Manual 8/99
5.42 OFDT Function Block
Description
The OFDT label stands for the Off Delay Timer. This block is part of the Fast Logic category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-52 OFDT Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O W output
RST_RUN 2 BOOL I R ON = reset, OFF = run
Static Configuration Parameters:
Table 5-53 ONDT Static Parameters
Parameter Index Type Description
Delay 0 REAL Delay Time (0 seconds, 0 to 9999.9)
To Next Page
Loading...
