Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 71
5.29 LDLG Function Block
Description
The LDLG label stands for Lead/Lag. This block is part of the Auxiliary category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Table 5-37 LDLG Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R output
IN 2 REAL I R primary input
EN 3 BOOL I R enable
Static Configuration Parameters:
None
To Next Page
Loading...
