Honeywell UMC800 - Table 5-86 TGFF Dynamic Parameters; TGFF Function Block

Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 119
5.66 TGFF Function Block
Description
The TGFF label stands for Toggle Flip-Flop. This block is part of the Logic or Fast Logic category. It
looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-86 TGFF Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
TOG 2 BOOL I R toggle input
RESET 3 BOOL I R reset input
Static Configuration Parameters:
None