Honeywell UMC800 - System Interconnections; Dimensions; Safety Protection; CE Conformity (Europe)

Function Parameter Index Reference
88 RS232 Communications Reference Manual 8/99
5.45 4OR Function Block
Description
The 4OR label stands for the inclusive OR (4 Inputs) Boolean logic function.
This block is part of the
Logic or Fast Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-57 4OR Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
DIG_1 2 BOOL I R input
DIG_2 3 BOOL I R input
DIG_3 4 BOOL I R input
DIG_4 5 BOOL I R input
Static Configuration Parameters:
None