Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 65
5.24 FSS Function Block
Description
The FSSlabel stands for Four-Selector Switch. This block is part of the Logic category. It looks like this
graphically on the Control Builder:
Dynamic Parameters:
Table 5-31 FSS Dynamic Parameters
Index Parameter Type Use R/W Description
0 status REAL C R block status
9 A1 BOOL O R Bank A output #1
10 A2 BOOL O R Bank A output #2
11 A3 BOOL O R Bank A output #3
12 A4 BOOL O R Bank A output #4
13 B1 BOOL O R Bank B output #1
14 B2 BOOL O R Bank B output #2
15 B3 BOOL O R Bank B output #3
16 B4 BOOL O R Bank B output #4
17 C1 BOOL O R Bank C output #1
18 C2 BOOL O R Bank C output #2
19 C3 BOOL O R Bank C output #3
To Next Page
Loading...
