Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 93
5.48 PTMR Function Block
Description
The PTMR label stands for Periodic Timer. This block is part of the Logic category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Table 5-61 PTMR Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
EVENT 1 BOOL O R output
RST 2 BOOL I R reset input
Static Configuration Parameters:
None
To Next Page
Loading...
Need help?
General
