Honeywell UMC800 - Diagnostics and Troubleshooting; Overview; Controller Diagnostics; Power up diagnostics

Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 69
5.27 HMON Function Block
Description
The HMON label stands for High Monitor. This block is part of the Alarm/Monitor category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-35 HMON Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R Output
X 2 REAL I R Monitored input
Y 3 REAL I R Trip point
Static Configuration Parameters:
None