Function Parameter Index Reference
70 RS232 Communications Reference Manual 8/99
5.28 HSEL Function Block
Description
The HSEL label stands for High Selector. This block is part of the Signal Selectors category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-36 HSEL Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R primary output
YHI(YLO) 2 BOOL O R override indication
X3REALIRinput
Y4REALIRinput
Static Configuration Parameters:
None
To Next Page
Loading...
