Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 83
5.41 ONDT Function Block
Description
The ONDT label stands for the On Delay Timer. This block is part of the Fast Logic category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-50 ONDT Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O W output
RUN_RST 2 BOOL I R ON = run, OFF = reset
Static Configuration Parameters:
Table 5-51 ONDT Static Parameters
Parameter Index Type Description
Delay 0 REAL Delay Time (0 seconds, 0 to 9999.9)
To Next Page
Loading...
