Honeywell UMC800 - Table 5-102 Variables; Variables

Function Parameter Index Reference
132 RS232 Communications Reference Manual 8/99
5.77 Variables
Description
Assigned Block Number (250) provides a means of reading from and writing to various arrays of variables.
List Block Number 250 in your request message and the required index number. The index numbers
(0 to 149) for the various variables can be obtained from a LeaderLine Control Builder variable list
printout.
ATTENTION
For Communications, subtract 1 from the variable index number on the Print out.
For Example: Variable 1 will be Variable 0 for communications purposes.
Dynamic Parameters:
Table 5-102 Variables
Parameter Index Type Use R/W Description
Variable
Parameter
0 - 149 REAL C R Array of Variables (0 to 99999.9)