Honeywell UMC800 - BOOL Function Block; Table 5-17 BOOL Dynamic Parameters

Function Parameter Index Reference
52 RS232 Communications Reference Manual 8/99
5.14 BOOL Function Block
Description
The BOOL label stands for Free Form Logic. This block is part of the Logic category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Table 5-17 BOOL Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R Result
ERR 2 BOOL O R Error indication
A 3 BOOL I R Input 1
B 4 BOOL I R Input 2
C 5 BOOL I R Input 3
D 6 BOOL I R Input 4
E 7 BOOL I R Input 5
F 8 BOOL I R Input 6
G 9 BOOL I R Input 7
H 10 BOOL I R Input 8
Static Configuration Parameters: None