Function Parameter Index Reference
80 RS232 Communications Reference Manual 8/99
5.38 4MUL Function Block
Description
The 4MUL label stands for Multiplication Mathematical Operation (4Inputs). This block is part of the
Math category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Table 5-47 4MUL Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R output
A 2 REAL I R input 1
B 3 REAL I R input 2
C 4 REAL I R input 3
D 5 REAL I R input 4
Static Configuration Parameters:
None
To Next Page
Loading...
Need help?
General
