Honeywell UMC800 - LMON Function Block; Table 5-38 LMON Dynamic Parameters

Function Parameter Index Reference
72 RS232 Communications Reference Manual 8/99
5.30 LMON Function Block
Description
The LMON label stands for Low Monitor. This block is part of the Alarm/Monitor category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-38 LMON Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R Output
X 2 REAL I R Monitored input
Y 3 REAL I R Trip point
Static Configuration Parameters:
None