Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 87
5.44 2OR Function Block
Description
The 2OR label stands for the inclusive OR (2 Inputs) Boolean logic function.
This block is part of the
Logic or Fast Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-56 2OR Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
DIG_1 2 BOOL I R input
DIG_2 3 BOOL I R input
Static Configuration Parameters:
None
To Next Page
Loading...
