Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 43
5.7 2AND Function Block
Description
The 2AND label stands for the AND Boolean function (2 Inputs). This block is part of the Logic or Fast
Logic category. It looks like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-9 2AND Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 BOOL O R output
DIG_1(X1) 2 BOOL I R input
DIG_2(X2) 3 BOOL I R input
Static Configuration Parameters
: None
To Next Page
Loading...
