Function Parameter Index Reference
8/99 RS232 Communications Reference Manual 95
5.50 RH Function Block
Description
The RH label stands for Relative Humidity. This block is part of the Calculations category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Table 5-63 RH Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
RH 1 REAL O R Relative Humidity
DRY 2 REAL I R Dry bulb temperature
WET 3 REAL I R Wet bulb temperature
PRES 4 REAL I R Atmospheric Pressure
Static Configuration Parameters:
None
To Next Page
Loading...
