Honeywell UMC800 - SQRT Function Block; Table 5-81 SQRT Dynamic Parameters

Function Parameter Index Reference
114 RS232 Communications Reference Manual 8/99
5.61 SQRT Function Block
Description
The SQRT label stands for Square Root. This block is part of the Calculations category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Table 5-81 SQRT Dynamic Parameters
Parameter Index Type Use R/W Description
status 0 REAL C R block status (see section 5.2 for code list)
OUT 1 REAL O R result
X2REALIRinput
Static Configuration Parameters:
None