Function Parameter Index Reference
62 RS232 Communications Reference Manual 8/99
5.22 DSW Function Block
Description
The DSW label stands for Digital Switch. This block is part of the Logic or Fast Logic categories. It looks
like this graphically on the Control Builder.
OR
Fast Logic
Dynamic Parameters:
Table 5-28 DSW Dynamic Parameters
Index Parameter Type Use R/W Description
0 status REAL C R block status (see section 5.2 for code list)
1 OUT BOOL O R output
2 A BOOL I R input A
3 B BOOL I R input B
4 SA BOOL I R Select A
Static Configuration Parameters:
None
To Next Page
Loading...
