Function Parameter Index Reference
124 RS232 Communications Reference Manual 8/99
use_rpm 33 BOOL
Use minutes (0) or repeats per minute (1) for integral constant
sp_rate_dn 34 REAL
Set point low rate of change limit, 0 (off) to 99999 (eu/min)
sp_rate_up 35 REAL
Set point high rate of change limit, 0 (off) to 99999 (eu/min)
RATIO 37 REAL
Gain value for Ratio PID (-20 to 20) (default 1) [ used when RA_BIAS
> 0]
LBIAS 38 REAL Bias value for Ratio PID when RA_BIAS = LOC_BIAS](-99999 to
99999) (0)
devbar_hi 39 REAL
High scale value for deviation bar graph (0 to 99999) (default 100)
devbar_low 40 REAL Low scale value for deviation bar graph [always = -devbar_hi]
deadband 43 REAL adjustable gap between forward and reverse motor operation (.5 to 5%)
To Next Page
Loading...
