HP 1910 - Page 190

177
Figure 160 Configuring GigabitEthernet 1/0/1 as a hybrid port
3. Configure the voice VLAN function globally:
a. Select Network > Voice VLAN from the navigation tree.
b. Click the Setup tab.
c. Select Enable in the Voice VLAN security list.
d. Set the voice VLAN aging timer to 30 minutes.
e. Click Apply.
Figure 161 Configuring the voice VLAN function globally
4. Configure voice VLAN on GigabitEthernet 1/0/1:
a. Click the Port Setup tab.
b. Select Auto in the Voice VLAN port mode list.