HP 1910 User Manual

516
Figure 494 Configuring priority mapping tables
2. Configure a priority mapping table as described in Table 156.
3. Click Apply.
Table 156 Configuration items
Item Descri
p
tion
Mapping Type
Select the priority mapping table to be configured:
• CoS to DSCP.
• CoS to Queue.
• DSCP to CoS.
• DSCP to DSCP.
• DSCP to Queue.
Input Priority Value
Set the output priority value for an input priority value.
Output Priority Value
Restore
Click Restore to display the default settings of the current priority mapping
table on the page.
To restore the priority mapping table to the default, click Apply.
Configuring priority trust mode on a port
1. Select QoS > Port Priority from the navigation tree to enter the port priority configuration page.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24