HP 1910 - Configuring a Rule for a Basic Ipv6 ACL

487
Table 136 Configuration items
Item Descri
p
tion
ACL Number Enter a number for the IPv6 ACL.
Match Order
Select a match order for the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Configuring a rule for a basic IPv6 ACL
1. Select QoS > ACL IPv6 from the navigation tree.
2. Click the Basic Setup tab.
The rule configuration page for a basic IPv6 ACL appears.
Figure 468 Configuring a rule for a basic IPv6 ACL
3. Add a rule for a basic IPv6 ACL.
4. Click Add.
Table 137 Configuration items
Item Descri
p
tion
Select Access Control List (ACL) Select the basic IPv6 ACL for which you want to configure rules.