HP 1910 - Configuring a Portal-Free Rule

406
Configuring a portal-free rule
1. Select Authentication > Portal from the navigation tree
2. Click the Free Rule tab to enter the portal-free rule list page.
Figure 380 Portal-free rule list
3. Click Add.
The page for adding a new portal-free rule appears.
Figure 381 Adding a portal-free rule
4. Configure a portal-free rule as described in Table 115.
5. Click Apply.
Table 115 Configuration items
Item Descri
p
tion
Number Specify a sequence number for the portal-free rule.
Source-interface Specify a source interface for the portal-free rule.
Source IP address
Specify a source IP address and mask for the portal-free rule.
Mask