HP 1910 - Managing Users; Adding a Local User

94
Managing users
The device provides the following user management functions:
• Add a local user, and specify the password, access level, and service types for the user.
• Set the super password for non-management-level users to switch to the management level.
• Switch to the management level from a lower level.
Adding a local user
1. Select Device > Users from the navigation tree.
2. Click the Create tab.
Figure 75 Creating a user
3. Configure a local user as described in Table 16.
4. Click Apply.
Table 16 Configuration items
Item Descri
p
tion
Username Set a username for the user.