HP 1910 - Displaying Port Operation Parameters; Displaying a Specified Operation Parameter for All Ports; Displaying All the Operation Parameters for a Port

80
NOTE:
If you set operation parameters that a port does not support, you are notified of invalid settin
g
s and mi
g
h
t
fail to set the supported operation parameters for the port or other ports.
Displaying port operation parameters
Displaying a specified operation parameter for all ports
1. Select Device > Port Management from the navigation tree to enter the Summary page by default.
2. Select the option for a parameter you want to view.
The parameter information for all the ports is displayed in the lower part of the page, as shown
in Figure 62.
Figure 62 The Summary tab
Displaying all the operation parameters for a port
1. Select Device > Port Management from the navigation tree
2. Click the Detail tab.
3. Select a port whose operation parameters you want to view in the chassis front panel, as shown
in Figure 63.