HP 1910 - Configuring Ports for the Mirroring Group

88
Figure 69 Adding a mirroring group
3. Configure the mirroring group as described in Table 14.
4. Click Apply.
Table 14 Configuration items
Item Descri
p
tion
Mirroring Group ID
ID of the mirroring group to be added.
The range of the mirroring group ID varies with devices.
Type
Specify the type of the mirroring group to be added as Local, which indicates
adding a local mirroring group.
Configuring ports for the mirroring group
1. From the navigation tree, select Device > Port Mirroring.
2. Click Modify Port to enter the page for configuring ports for a mirroring group.