HP 1910 User Manual

454
Figure 433 PKI entity list
2. Click Add.
Figure 434 PKI entity configuration page
3. Configure the parameters as described in Table 123.
4. Click Apply.
Table 123 Configuration items
Item Descri
p
tion
Entity Name Enter the name for the PKI entity.
Common Name Enter the common name for the entity.
IP Address Enter the IP address of the entity.
FQDN
Enter the fully qualified domain name (FQDN) for the entity.
An FQDN is a unique identifier of an entity on the network. It consists of a host
name and a domain name and can be resolved to an IP address. For example,
www.whatever.com
is an FQDN, where www indicates the host name and
whatever.com the domain name.
Country/Region Code Enter the country or region code for the entity.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24