HP 1910 User Manual

460
Item Descri
p
tion
Certificate Type Select the type of the certificate to be retrieved, which can be CA or local.
Enable Offline
Mode
Click this box to retrieve a certificate in offline mode (that is, by an out-of-band means like
FTP, disk, or email) and then import the certificate into the local PKI system.
The following configuration items are displayed if this box is selected.
Get File From
Device
Specify the path and name of the certificate file to import:
• If the certificate file is saved on the device, select Get File From Device and then specify
the path and name of the file on the device. If no file is specified, the system, by
default, gets the file domain-name_ca.cer (for the CA certificate) or
domain-name_local.cer (for the local certificate) under the root directory of the device.
• If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path and name of the file and specify the partition that saves the file.
Get File From PC
Password
Enter the password for protecting the private key, which was specified when the
certificate was exported.
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24