HP 1910 User Manual

506
Item Descri
p
tion
DSCP
Define a rule to match DSCP values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight DSCP values each time. If multiple identical
DSCP values are specified, the system considers them as one. The relationship
between different DSCP values is OR. After such configurations, all the DSCP
values are arranged in ascending order automatically.
IP Precedence
Define a rule to match IP precedence values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight IP precedence values each time. If multiple
identical IP precedence values are specified, the system considers them as
one. The relationship between different IP precedence values is OR. After such
configurations, all the IP precedence values are arranged in ascending order
automatically.
Dot1p
Service 802.1p
Define a rule to match the service 802.1p priority values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight 802.1p priority values each time. If multiple
identical 802.1p priority values are specified, the system considers them as
one. The relationship between different 802.1p priority values is OR. After
such configurations, all the 802.1p priority values are arranged in ascending
order automatically.
Customer 802.1p
Define a rule to match the customer 802.1p priority values.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure up to eight 802.1p priority values each time. If multiple
identical 802.1p priority values are specified, the system considers them as
one. The relationship between different 802.1p priority values is OR. After
such configurations, all the 802.1p priority values are arranged in ascending
order automatically.
MAC
Source MAC
Define a rule to match a source MAC address.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
A rule to match a source MAC address is significant only to Ethernet
interfaces.
Destination MAC
Define a rule to match a destination MAC address.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
A rule to match a destination MAC address is significant only to Ethernet
interfaces.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24