HP 1910 User Manual

70
3. Configure buffer capacity and refresh interval as described in Table 12.
4. Click Apply.
Table 12 Configuration items
Item Descri
p
tion
Buffer Capacity Set the number of logs that can be stored in the log buffer of the Web interface.
Refresh Interval
Set the refresh period on the log information displayed on the Web interface.
You can select manual refresh or automatic refresh:
• Manual—Click Refresh to refresh the Web interface when displaying log
information.
• Automatic—Select to refresh the Web interface every 1 minute, 5 minutes, or 10
minutes.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24