HP 5800 Series

147
Table 66 Command output
Field Description
LSP-ID LSP ID of tunnel
Destination Destination router ID
In/Out-IF Incoming/outgoing interface
Name Tunnel name configured on the ingress node
# Display detailed information about MPLS TE tunnels.
<Sysname> display mpls te tunnel verbose
No : 1
LSP-Id : 1.1.1.9:1024
Tunnel-Name : Tunnel0
Destination : 3.3.3.9
In-Interface : -
Out-Interface : Vlan3
Ingress LSR-Id : 1.1.1.9
Egress LSR-Id : 3.3.3.9
Setup-Priority : 7
Hold-Priority : 7
Sign-Protocol : RSVP TE
Resv Style : SE
IncludeAnyAff : 0x0
ExcludeAllAff : 0x0
IncludeAllAff : 0x0
Created Time : 2004/10/18 16:05:17
Table 67 Command output
Field Description
No Number
LSP-Id LSP ID of tunnel
Tunnel-Name Tunnel name configured on the ingress node
Destination Destination router ID
In-Interface Incoming interface
Out-Interface Outgoing interface
Ingress LSR-Id Ingress LSR ID
Egress LSR-Id Egress LSR-ID
Setup-Priority Setup priority of link
Hold-Priority Holding priority of link
Sign-Protocol Signaling protocol
Resv Style Reservation style
IncludeAnyAff Any affinity properties that must be included